A Prosody Consulting Research Product · prosodyconsulting.comA Prosody Consulting Research Product · prosodyconsulting.comProsody Labs · Program Analytics
Every award made under MARAD's Assistance for Small Shipyards program (46 U.S.C. §54101) since the program was first funded in 2008 —427 grants, $355.7M — normalized to a single schema and classified by the capital asset each grant actually bought. Select a round below, or All-Time for the full record.
Every funding round on one axis. The program has run in three distinct regimes: a small pilot (2008), a one-time $98M Recovery Act surge (2009 ARRA), and a ~$10–20M annual steady state that stepped up sharply in FY2026. Bars are the selected metric; the selected round is highlighted.
Gaps are real. Congress appropriated nothing in 2014 and 2015, so those years have no round and appear nowhere on this axis. Click any bar to change the selected round.
Running totals through each round. Bars are the round; the line is program-to-date.
Every award is classified by the primary capital asset its project description names. This is the analysis MARAD does not publish: the program is, in dollar terms, overwhelmingly avessel-handling and steel-fabrication program. Values are direct-labeled so the chart reads without relying on colour; the full classified record is in the award table below.
Share of each round's dollars by asset class. Drydock and haul-out infrastructure spikes when a round is large enough to fund one; lifting and handling is the constant.
Top 15 states for the selected scope. Small-shipyard capacity is concentrated on the Gulf Coast and the Pacific Northwest, but the program reaches inland river and Great Lakes yards that few other federal maritime programs touch.
Where awards actually land. The practical ceiling has moved with the appropriation: roughly $1.0M in 2016–2020, $1.2M in 2022–2023, and $1.5M in FY2026.
Dollars requested against dollars awarded, for the seven rounds where a dollar figure exists anywhere in the public record. Two further rounds have an application count but no published dollar total — FY2019 (80 applications) and FY2022 (93). FY2026 drew172 applications requesting $162.7M, the most of either in program history.
The odds improved, but demand set a record. Oversubscription ran 10×–16× in the small-appropriation years (FY2011–FY2016) and has since fallen to 4.6× in FY2026 — not because fewer yards applied, but because the appropriation quadrupled. On a per-applicant basis the picture is the mirror image: a roughly 1-in-13 chance of an award in FY2016 versus about 1 in 4 in FY2026. Even so, FY2026 left roughly $128M of requested capital unfunded.
Provenance. MARAD has never published the applicant list its own NOFOs promise — FY2024 §H.2 and FY2025/FY2026 §J.2 each state it "intends to publish a list of all applications received along with the names of the applicant organizations and funding amounts requested." The figures here are assembled from DOT press releases (FY2011–FY2016), the SAM.gov Assistance Listing 20.814 Program Accomplishments note (FY2019, FY2022), GAO-25-107304 (FY2023, FY2024) and trade press (FY2026). FY2017, FY2018, FY2020, FY2021 and FY2025 have no published figure at all.
From the FY2026 Notice of Funding Opportunity (DTMASSG26, Assistance Listing 20.814). The award history above tells you what wins; this tells you how it is scored. Applications were dueMay 11, 2026 at noon EDT, with awards announced by July 10, 2026 — the statute (46 U.S.C. §54101(b)(3)) requires MARAD to award within 120 days of the appropriations act.
| NOFO section | Criterion | Weight |
|---|---|---|
| D2(c) | Quantitative Analysis | High |
| D2(b) | Need | Medium |
| D2(a) | Description | Low |
| D2(d) | Methodology & Timeline | Low |
| D2(e) | Itemization | Low |
| D2(f), D2(g), F2(b) | NEPA, domestic preference, additional considerations | Low |
One criterion carries the round. Quantitative Analysis is the only High-weighted item, and the NOFO says so outright: applications "should focus on Section 2 … especially Section 2(c), to offer the best chance of an award." It asks for benefits quantified in man-hours saved, dollars saved or percentages, with the methodology, assumptions and justification spelled out. A vivid equipment description scores Low no matter how well written.
| Eligibility | Single geographic location; ≤1,200 production employees; applicant must be the operating company; facility builds, repairs or reconfigures vessels ≥40 ft (commercial/government) or ≥100 ft (non-commercial). |
| Cost share | Federal share ≤75%. Third-party in-kind contributionsdo not count toward the 25% match. Evidence of ability to fund the match is a responsiveness screen, not a scoring item. |
| One shot | One application per applicant, one award maximum — but an application may bundle multiple projects, prioritized in the budget table. |
| Ineligible uses | No constructing buildings or other physical facilities; no land acquisition. Funded items must be new and owned by the recipient. Costs incurred before grant execution are ineligible without prior written approval. |
| Large-yard cap | No more than 25% of available funds may go to yards with more than 600 production employees at one location. |
| Tie-breakers | Among projects of similar merit, MARAD may prefer (i) non-federal match above the 25% floor and above competing applications; (ii) domestic-content purchases needing no waiver; (iii) innovative technology — new in FY2026. |
What changed for FY2026. Three things: the innovative-technology preference was added, a Program Evaluation clause was added, and Section H was updated for federal anti-discrimination policy. Domestic preference under 46 U.S.C. §54101(d)(2) applies toevery award, including those under $500,000, notwithstanding DOT's 2023 Buy America small-grant waiver.
The appropriation math. The Consolidated Appropriations Act, 2026 (P.L. 119-75, Feb. 3, 2026) appropriated $35M; MARAD may retain up to 2% for administration, leaving $34.3M for awards. The 45 FY2026 awards total $35,137,023— about $0.8M more. The NOFO explains it: unexpended prior-year Small Shipyard Grant funds may be awarded under the same notice, so deobligated money from earlier rounds gets recycled forward.
243 distinct shipyards have won at least once; 83 have won more than once and a meaningful minority have won three or more times. Names are matched across rounds through a normalization pass (legal-suffix stripping, d/b/a collapsing, and a hand-maintained alias table for renamed and acquired yards).
| Shipyard | State | Rounds Won | Total Awarded | First | Latest | Rounds |
|---|---|---|---|---|---|---|
| Chesapeake Shipbuilding Corp | MD | 8 | $5,302,399 | FY2010 | FY2025 | FY2010 FY2012 FY2013 FY2016 FY2018 FY2020 FY2022 FY2025 |
| Gulf Marine Repair Corp. | FL | 6 | $8,427,998 | FY2008 | FY2026 | FY2008 FY2009 ARRA FY2012 FY2020 FY2024 FY2026 |
| Philly Shipyard, Inc | PA | 6 | $6,770,338 | FY2009 | FY2024 | FY2009 Omnibus FY2009 ARRA FY2017 FY2020 FY2021 FY2024 |
| The Great Lakes Towing Company | OH | 6 | $5,211,573 | FY2008 | FY2022 | FY2008 FY2009 ARRA FY2012 FY2017 FY2020 FY2022 |
| Bay Ship & Yacht Co. | CA | 6 | $4,346,609 | FY2009 | FY2025 | FY2009 ARRA FY2011 FY2017 FY2021 FY2023 FY2025 |
| Conrad Orange Shipyard, Inc. | TX | 6 | $3,907,288 | FY2008 | FY2025 | FY2008 FY2012 FY2013 FY2016 FY2021 FY2025 |
| Thames Shipyard & Repair Company | CT | 6 | $3,131,574 | FY2010 | FY2026 | FY2010 FY2013 FY2017 FY2021 FY2023 FY2026 |
| Ice Floe, LLC dba Nichols Brothers Boat Builders | WA | 5 | $4,265,063 | FY2009 | FY2025 | FY2009 ARRA FY2011 FY2018 FY2022 FY2025 |
| Safe Boats International LLC | WA | 5 | $3,302,071 | FY2008 | FY2026 | FY2008 FY2009 ARRA FY2020 FY2022 FY2026 |
| Everett Ship Repair LLC | WA | 5 | $3,092,747 | FY2008 | FY2026 | FY2008 FY2009 ARRA FY2021 FY2023 FY2026 |
| All American Marine, Inc. | WA | 5 | $2,895,818 | FY2008 | FY2023 | FY2008 FY2009 ARRA FY2013 FY2019 FY2023 |
| Marine Group Boat Works, LLC | CA | 5 | $2,721,899 | FY2016 | FY2025 | FY2016 FY2018 FY2021 FY2023 FY2025 |
| J. Goodison Company, Inc. | RI | 5 | $2,637,030 | FY2017 | FY2025 | FY2017 FY2019 FY2020 FY2023 FY2025 |
| Eastern Shipbuilding Group, Inc. (Allanton) | FL | 5 | $2,222,616 | FY2008 | FY2025 | FY2008 FY2016 FY2019 FY2021 FY2025 |
| Pacific Shipyards International, LLC | HI | 4 | $7,099,313 | FY2008 | FY2026 | FY2008 FY2009 ARRA FY2018 FY2026 |
| Fincantieri Marine Group LLC | WI | 4 | $6,769,235 | FY2009 | FY2026 | FY2009 Omnibus FY2018 FY2022 FY2026 |
| ST Engineering Halter Marine and Offshore, Inc. | MS | 4 | $6,255,792 | FY2009 | FY2022 | FY2009 Omnibus FY2019 FY2020 FY2022 |
| Master Boat Builders | AL | 4 | $4,584,350 | FY2009 | FY2025 | FY2009 ARRA FY2018 FY2021 FY2025 |
| Colonna's Shipyard, Inc. | VA | 4 | $3,975,829 | FY2008 | FY2020 | FY2008 FY2009 ARRA FY2017 FY2020 |
| MARISCO, LTD. | HI | 4 | $3,593,507 | FY2010 | FY2026 | FY2010 FY2020 FY2024 FY2026 |
| Detyens Shipyards, Inc. | SC | 4 | $3,447,101 | FY2010 | FY2022 | FY2010 FY2012 FY2019 FY2022 |
| C&C Marine and Repair, LLC | LA | 4 | $3,242,780 | FY2013 | FY2024 | FY2013 FY2020 FY2021 FY2024 |
| Heartland Fabrication, LLC | PA | 4 | $3,239,829 | FY2019 | FY2025 | FY2019 FY2021 FY2023 FY2025 |
| Blount Boats, Inc. | RI | 4 | $2,995,318 | FY2009 | FY2022 | FY2009 ARRA FY2013 FY2017 FY2022 |
| Bludworth Marine, LLC | TX | 4 | $2,972,609 | FY2009 | FY2020 | FY2009 ARRA FY2012 FY2017 FY2020 |
| United States Marine Inc. | MS | 4 | $1,151,753 | FY2010 | FY2026 | FY2010 FY2018 FY2023 FY2026 |
| Lyon Shipyard | VA | 3 | $6,279,986 | FY2009 | FY2021 | FY2009 ARRA FY2013 FY2021 |
| LEEVAC Shipyards, LLC | LA | 3 | $4,466,909 | FY2008 | FY2012 | FY2008 FY2009 ARRA FY2012 |
| Washburn & Doughty Associates, Inc. | ME | 3 | $3,911,672 | FY2008 | FY2018 | FY2008 FY2009 ARRA FY2018 |
| Jeffboat, LLC | IN | 3 | $3,626,804 | FY2009 | FY2017 | FY2009 ARRA FY2013 FY2017 |
| Southwest Shipyard, LP | TX | 3 | $3,467,195 | FY2010 | FY2023 | FY2010 FY2011 FY2023 |
| MBLH Marine, LLC | TX | 3 | $3,449,343 | FY2019 | FY2026 | FY2019 FY2021 FY2026 |
| Stevens Towing Co., Inc. | SC | 3 | $3,197,108 | FY2009 | FY2026 | FY2009 ARRA FY2021 FY2026 |
| The General Ship Repair Corporation | MD | 3 | $3,153,339 | FY2009 | FY2024 | FY2009 ARRA FY2017 FY2024 |
| Marinette Marine Corporation | WI | 3 | $3,109,313 | FY2009 | FY2019 | FY2009 Omnibus FY2011 FY2019 |
| Senesco Marine, LLC | RI | 3 | $2,810,313 | FY2009 | FY2023 | FY2009 ARRA FY2011 FY2023 |
| Bayonne Drydock & Repair Corp. | NJ | 3 | $2,485,550 | FY2018 | FY2026 | FY2018 FY2023 FY2026 |
| James Marine Inc. | KY | 3 | $2,284,933 | FY2018 | FY2026 | FY2018 FY2024 FY2026 |
| Duclos Corporation dba Gladding Hearn | MA | 3 | $2,207,874 | FY2008 | FY2022 | FY2008 FY2009 Omnibus FY2022 |
| Vigor Alaska, LLC | AK | 3 | $2,167,134 | FY2008 | FY2017 | FY2008 FY2011 FY2017 |
| Robert E. Derecktor, Inc. | NY | 3 | $2,157,998 | FY2008 | FY2026 | FY2008 FY2022 FY2026 |
| Dorchester Shipyard, Inc. | NJ | 3 | $1,974,528 | FY2013 | FY2022 | FY2013 FY2018 FY2022 |
| Blakeley Boatworks Inc. | AL | 3 | $1,838,412 | FY2020 | FY2026 | FY2020 FY2022 FY2026 |
| National Maintenance and Repair, Inc. | IL | 3 | $1,775,678 | FY2009 | FY2018 | FY2009 ARRA FY2017 FY2018 |
| Marine Hydraulics International, LLC | VA | 3 | $1,663,120 | FY2009 | FY2021 | FY2009 ARRA FY2018 FY2021 |
| Hughes Bros. | NY | 3 | $1,628,467 | FY2019 | FY2023 | FY2019 FY2021 FY2023 |
| Catalyst Marine Engineering, LLC | AK | 3 | $1,414,545 | FY2018 | FY2026 | FY2018 FY2022 FY2026 |
| Lake Union Drydock Company | WA | 3 | $1,166,476 | FY2009 | FY2025 | FY2009 ARRA FY2021 FY2025 |
| North Florida Shipyard | FL | 2 | $3,771,529 | FY2009 | FY2013 | FY2009 Omnibus FY2013 |
| International Ship Repair & Marine Services | FL | 2 | $3,208,567 | FY2009 | FY2013 | FY2009 ARRA FY2013 |
| St. John's Ship Building Inc. | FL | 2 | $3,143,977 | FY2009 | FY2019 | FY2009 ARRA FY2019 |
| McGinnis, Inc. | OH | 2 | $2,190,319 | FY2009 | FY2022 | FY2009 ARRA FY2022 |
| Kvichak Marine Industries | WA | 2 | $2,125,909 | FY2009 | FY2012 | FY2009 ARRA FY2012 |
| St. Johns Ship Building, Inc. | FL | 2 | $1,959,764 | FY2021 | FY2025 | FY2021 FY2025 |
| Foss Maritime Company | WA | 2 | $1,907,713 | FY2009 | FY2012 | FY2009 ARRA FY2012 |
| Arcosa Marine Products | MO | 2 | $1,781,122 | FY2022 | FY2026 | FY2022 FY2026 |
| Bollinger Shipyards, Lockport LLC | LA | 2 | $1,668,349 | FY2009 | FY2018 | FY2009 Omnibus FY2018 |
| JAG Alaska, Inc. Seward Shipyard | AK | 2 | $1,616,010 | FY2019 | FY2021 | FY2019 FY2021 |
| North Shore Marine Terminal & Logistics Inc. | MI | 2 | $1,611,490 | FY2018 | FY2026 | FY2018 FY2026 |
| Fraser Shipyards, LLC | WI | 2 | $1,610,308 | FY2020 | FY2025 | FY2020 FY2025 |
| BRIX Marine Inc. | WA | 2 | $1,601,508 | FY2021 | FY2026 | FY2021 FY2026 |
| Cooper Consolidated LLC | LA | 2 | $1,568,440 | FY2020 | FY2024 | FY2020 FY2024 |
| Diversified Marine, Inc. | OR | 2 | $1,558,006 | FY2016 | FY2020 | FY2016 FY2020 |
| Rhoads Industries, Inc | PA | 2 | $1,552,096 | FY2019 | FY2024 | FY2019 FY2024 |
| JamesBuilt, LLC | KY | 2 | $1,481,280 | FY2011 | FY2025 | FY2011 FY2025 |
| WCT Marine & Construction, Inc | OR | 2 | $1,447,372 | FY2020 | FY2024 | FY2020 FY2024 |
| Brownsville Marine Products, LLC | PA | 2 | $1,410,166 | FY2008 | FY2011 | FY2008 FY2011 |
| Mike's Inc. | IL | 2 | $1,362,827 | FY2019 | FY2023 | FY2019 FY2023 |
| Yank Marine | NJ | 2 | $1,347,926 | FY2011 | FY2016 | FY2011 FY2016 |
| Alabama Shipyard LLC | AL | 2 | $1,290,329 | FY2020 | FY2023 | FY2020 FY2023 |
| Pacific Fishermen Shipyard and Electric, LLC | WA | 2 | $1,199,403 | FY2010 | FY2021 | FY2010 FY2021 |
| Norseman Shipbuilding and Boatyard, LLC | FL | 2 | $1,194,405 | FY2019 | FY2023 | FY2019 FY2023 |
| Boston Ship Repair | MA | 2 | $1,174,200 | FY2017 | FY2021 | FY2017 FY2021 |
| Gulf Island Shipyards, LLC | LA | 2 | $1,069,970 | FY2017 | FY2021 | FY2017 FY2021 |
| Moran Iron Works, Inc. | MI | 2 | $1,064,861 | FY2019 | FY2022 | FY2019 FY2022 |
| Gravois Aluminum Boats, LLC | LA | 2 | $1,034,270 | FY2016 | FY2018 | FY2016 FY2018 |
| Trinity Industries, Inc. | MO | 2 | $1,026,933 | FY2009 | FY2012 | FY2009 ARRA FY2012 |
| Metal Trades, Inc. | SC | 2 | $1,012,295 | FY2018 | FY2020 | FY2018 FY2020 |
| Snow and Company, Inc. | WA | 2 | $884,661 | FY2018 | FY2025 | FY2018 FY2025 |
| Steiner Construction Company, Inc. | AL | 2 | $720,495 | FY2021 | FY2026 | FY2021 FY2026 |
| Shaver Transportation Co. | OR | 2 | $660,038 | FY2022 | FY2026 | FY2022 FY2026 |
| Horizon Shipbuilding, Inc. | AL | 2 | $376,500 | FY2008 | FY2009 | FY2008 FY2009 ARRA |
| Mystic Seaport Museum, Inc. | CT | 2 | $227,691 | FY2023 | FY2026 | FY2023 FY2026 |
Every line item in the normalized record. Sort by any column; filter by round, state, asset class or free text.
Coverage is complete; reconciliation is near-exact. All 427 awards across all 18 rounds, FY2008 through FY2026, summing to $355,630,892 in line items against $355,675,882 in MARAD's published round totals. 15 of 18 rounds reconcile to the cent. The 3 that do not: FY2013 under by $2,014, FY2016 over by $1, FY2026 under by $42,977 — FY2026 because MARAD quotes a rounded $35.18M, FY2013 and FY2016 from rounding in the published round total. This page uses the line-item sum wherever awards are added up and MARAD's figure wherever their total is quoted.
| Round | Shipyard | City | St | Asset Class | Project | Award | Wins |
|---|---|---|---|---|---|---|---|
| FY2009 ARRA | Lyon Shipyard, Inc. | Norfolk | VA | Drydock & Haul-Out | Drydock enhancement | $4,542,123 | 3× |
| FY2009 ARRA | Gulf Marine Repair Corporation | Tampa | FL | Drydock & Haul-Out | Drydock expansion | $4,159,857 | 6× |
| FY2009 ARRA | Pacific Shipyards International, LLC | Honolulu | HI | Cutting & Forming | Waterjet cutting system, plate and angle rollers, press brake, shear | $3,964,362 | 4× |
| FY2009 ARRA | LEEVAC Shipyards, LLC | Jennings | LA | Lifting & Handling | Two cranes and other equipment | $3,733,517 | 3× |
| FY2009 Omnibus | North Florida Shipyards, Inc. | Jacksonville | FL | Lifting & Handling | Waterblast equipment, travelift | $3,312,369 | 2× |
| FY2009 ARRA | Eastern Shipbuilding Group, Inc. / Bay Fabrication, Inc. | Panama City | FL | Cutting & Forming | Ogden panel line | $2,986,620 | — |
| FY2009 ARRA | Blue Danube Corporation | Georgetown | PA | Drydock & Haul-Out | New drydock | $2,973,750 | — |
| FY2009 ARRA | Derecktor Shipyards Connecticut, LLC | Bridgeport | CT | Drydock & Haul-Out | Drydock modifications | $2,947,710 | — |
| FY2009 Omnibus | Bay Shipbuilding Co. | Sturgeon Bay | WI | Cutting & Forming | Transporter, panel line, equipment | $2,894,972 | 4× |
| FY2009 ARRA | Washburn & Doughty Associates, Inc. | East Boothbay | ME | Drydock & Haul-Out | New drydock | $2,659,500 | 3× |
| FY2009 ARRA | General Ship Repair Corporation | Baltimore | MD | Drydock & Haul-Out | Drydock expansion | $2,400,125 | 3× |
| FY2009 ARRA | St. John's Ship Building, Inc. | Palatka | FL | Drydock & Haul-Out | Drydock and air compressor | $2,343,977 | 2× |
| FY2009 ARRA | Master Boat Builders, Inc. | Bayou La Batre | AL | Lifting & Handling | 300-ton crawler crane and two rough terrain cranes | $2,326,683 | 4× |
| FY2009 ARRA | Aker Philadelphia Shipyard, Inc. | Philadelphia | PA | Workforce & Training | First year of training program | $2,312,614 | 6× |
| FY2009 ARRA | Jeffboat LLC | Jeffersonville | IN | Drydock & Haul-Out | Slipway repair and aerial lifts | $2,301,837 | 3× |
| FY2009 ARRA | Gulf Copper Manufacturing Group | Galveston | TX | General Equipment & Modernization | Fabrication shop upgrade | $2,274,022 | — |
| FY2009 ARRA | Tampa Ship, LLC | Tampa | FL | Cutting & Forming | Panel line | $2,270,172 | — |
| FY2009 ARRA | International Ship Repair & Marine Services, Inc. | Tampa | FL | Drydock & Haul-Out | Drydock life extension | $2,228,307 | 2× |
| FY2009 ARRA | Colonna's Shipyard, Inc. | Norfolk | VA | Coatings & Surface Prep | Waste water treatment barge, DAF water treatment system, hydro blast equipment, big top enclosure | $1,963,333 | 4× |
| FY2009 Omnibus | Aker Philadelphia Shipyard, Inc. | Philadelphia | PA | Cutting & Forming | Thermal machining center | $1,951,022 | 6× |
| FY2009 ARRA | Todd Pacific Shipyards Corporation, Inc. | Seattle | WA | Workforce & Training | Training program | $1,945,981 | — |
| FY2009 ARRA | Signal International, LLC | Pascagoula | MS | Cutting & Forming | Profile cutting system, semi-auto beveller, 750-ton brake press, roll form press | $1,893,087 | — |
| FY2009 ARRA | James Built, LLC | Calvert City | KY | Lifting & Handling | Press brake, two rough terrain cranes, wheelabrator, CNC plasma table | $1,843,935 | — |
| FY2009 ARRA | Austal USA LLC | Mobile | AL | Lifting & Handling | Overhead bridge crane and 225-ton mobile crane | $1,807,500 | — |
| FY2009 ARRA | Steiner Shipyard, Inc. | Bayou La Batre | AL | Lifting & Handling | 400-ton travelift | $1,802,836 | — |
| FY2009 ARRA | Houma Industries, LLC | Harvey | LA | Lifting & Handling | 275-ton crane | $1,793,477 | — |
| FY2009 ARRA | Senesco Marine | North Kingstown | RI | Lifting & Handling | Transporter and four overhead cranes | $1,792,347 | 3× |
| FY2009 ARRA | BAE Systems San Francisco Ship Repair | San Francisco | CA | Drydock & Haul-Out | Drydock strengthening and upgrades | $1,783,175 | — |
| FY2009 ARRA | G&H Barge Repair & Fabrication, LLC | Houma | LA | Drydock & Haul-Out | New drydock | $1,766,100 | — |
| FY2010 | Gulf Craft, L.L.C. | Patterson | LA | Lifting & Handling | 500-ton travelift | $1,760,065 | — |
| FY2009 ARRA | Ellicott Dredges, LLC | Baltimore | MD | Lifting & Handling | Material handling, machining, welding, and IT upgrades | $1,755,330 | — |
| FY2020 | VT Halter Marine | Pascagoula | MS | Cutting & Forming | 1,250-ton press brake | $1,695,118 | 4× |
| FY2009 ARRA | Fairhaven Shipyard Companies, Inc. | Fairhaven | MA | Lifting & Handling | 400-ton travelift | $1,630,750 | — |
| FY2010 | Southwest Shipyard, LP | Channelview | TX | Cutting & Forming | Panel line | $1,602,870 | 3× |
| FY2009 ARRA | Vigor Industrial LLC | Portland | OR | Drydock & Haul-Out | Integrated thermal cutting system, virtual paint system, drydock automation system, plural paint system, portable boiler system | $1,582,665 | — |
| FY2009 Omnibus | VT Halter Marine (Pascagoula), Inc. | Pascagoula | MS | General Equipment & Modernization | Transporter, cover | $1,565,587 | 4× |
| FY2026 | Gunderson Marine LLC | Portland | OR | Cutting & Forming | CNC plasma cutter with 16-foot cutting width | $1,534,953 | — |
| FY2026 | Pacific Shipyards International, LLC | Honolulu | HI | Lifting & Handling | 120-ton crane, welding and plasma cutting integration | $1,533,815 | 4× |
| FY2026 | Delta Marine Industries, Inc. | Seattle | WA | Lifting & Handling | 620-ton Travelift | $1,508,597 | — |
| FY2026 | Stevens Towing Co., Inc. | Hollywood | SC | Facility & Utilities | Mid-yard utilities upgrade (electrical, gas, water, infrastructure) | $1,500,000 | 3× |
| FY2026 | MBLH Marine, LLC | Port Arthur | TX | Drydock & Haul-Out | 100 x 65 x 28 ft floating drydock | $1,500,000 | 3× |
| FY2009 ARRA | Bay Ship & Yacht Co. | Alameda | CA | Lifting & Handling | 90-ton crane and high reach equipment | $1,452,526 | 6× |
| FY2010 | Thames Shipyard & Repair Company | New London | CT | Drydock & Haul-Out | Widen and lengthen drydock | $1,446,000 | 6× |
| FY2009 ARRA | McGinnis, Inc. | South Point | OH | Cutting & Forming | Plasma table, welding items, press brake, angle bending roll | $1,420,069 | 2× |
| FY2009 ARRA | Yager Materials, LLC | Owensboro | KY | Cutting & Forming | Panel line | $1,407,612 | — |
| FY2026 | JAG Alaska Inc. | Seward | AK | Drydock & Haul-Out | Rail system expansion and vessel movement assets | $1,405,113 | — |
| FY2009 Omnibus | Marinette Marine Company | Marinette | WI | Lifting & Handling | Bridge cranes, deck straightener, equipment | $1,404,919 | 3× |
| FY2018 | Fincantieri Marine Group LLC dba Fincantieri Bay Shipbuilding | Sturgeon Bay | WI | Lifting & Handling | Four 50-ton overhead cranes | $1,401,061 | 4× |
| FY2020 | The Great Lakes Towing Company | Cleveland | OH | Lifting & Handling | 820-ton travelift | $1,400,000 | 6× |
| FY2021 | Stevens Towing Co. Inc. | Yonges Island | SC | Lifting & Handling | 820-metric-ton travelift for zero-emissions yard expansion | $1,378,575 | 3× |
| FY2009 Omnibus | Basic Marine, Inc. | Escanaba | MI | Cutting & Forming | Cutting table, press brake, welders | $1,376,187 | — |
| FY2019 | MBLH Marine LLC dba Vessel Repair | Port Arthur | TX | Drydock & Haul-Out | New dry dock construction | $1,360,531 | 3× |
| FY2021 | St. Johns Ship Building, Inc. | Palatka | FL | Drydock & Haul-Out | 2,000-ton drydock construction | $1,342,724 | 2× |
| FY2020 | Bludworth Marine, LLC | Houston | TX | Lifting & Handling | 275-ton crawler crane | $1,337,468 | 4× |
| FY2010 | Puglia Engineering, Inc. | Tacoma | WA | Drydock & Haul-Out | Floating drydock enhancements, 80-ton rough terrain crane, coating equipment | $1,333,267 | — |
| FY2018 | Master Boat Builders, Inc. | Bayou La Batre | AL | Lifting & Handling | 182-ton crawler, 55-ton mobile crane, 30-ton rough terrain crane | $1,332,607 | 4× |
| FY2019 | Biblia, Inc. | Savannah | GA | Drydock & Haul-Out | 500-ton floating drydock construction | $1,319,414 | — |
| FY2009 ARRA | Signal International Texas, LP | Orange | TX | Cutting & Forming | Panel line | $1,313,300 | — |
| FY2018 | Ice Floe, LLC dba Nichols Brother Boat Builders | Freeland | WA | Lifting & Handling | 250-ton lattice boom crawler crane | $1,312,500 | 5× |
| FY2018 | Gulf Copper Dry Dock & Rig Repair | Galveston | TX | Drydock & Haul-Out | 4,500-ton dry dock construction | $1,296,820 | — |
| FY2009 ARRA | RiverHawk Marine, LLC | Tampa | FL | Lifting & Handling | Travelift and syncrolift control upgrade | $1,290,246 | — |
| FY2026 | Fincantieri Marine Group LLC | Sturgeon Bay | WI | Lifting & Handling | CNC profile cutter, 100-ton crane | $1,273,202 | 4× |
| FY2026 | BRIX Marine Inc. | Port Angeles | WA | Lifting & Handling | Four 10-ton remote overhead cranes | $1,259,190 | 2× |
| FY2020 | Diversified Marine, Inc. | Portland | OR | Lifting & Handling | 275-ton crawler crane | $1,253,160 | 2× |
| FY2022 | Ice Floe, LLC dba Nichols Brothers Boat Builders | Freeland | WA | Lifting & Handling | One-sided welder with material handling conveyor system | $1,234,408 | 5× |
| FY2009 ARRA | Atlantic Marine Florida, LLC | Jacksonville | FL | General Equipment & Modernization | Steel fabrication upgrades | $1,234,340 | — |
| FY2011 | C&C Marine Maintenance - Congo Shipyard | Newell | WV | Drydock & Haul-Out | New dry dock | $1,232,135 | — |
| FY2023 | Southwest Shipyard, LP | Channelview | TX | Coatings & Surface Prep | Blasting and painting equipment upgrades | $1,200,000 | 3× |
| FY2022 | Patti Marine Enterprises, Inc. | Pensacola | FL | Drydock & Haul-Out | Construct a new 800-ton drydock | $1,200,000 | — |
| FY2022 | Fincantieri Marine Group, LLC - Bay Shipbuilding | Sturgeon Bay | WI | Drydock & Haul-Out | Modernization of their graving dock pump | $1,200,000 | 4× |
| FY2020 | Cooper Consolidated, LLC | Convent | LA | Lifting & Handling | 620-ton Marine Travelift | $1,200,000 | 2× |
| FY2019 | TPG Chicago Dry Dock LLC | Chicago | IL | Drydock & Haul-Out | Dry dock and welder training program | $1,200,000 | — |
| FY2010 | C&G Boat Works, Inc. | Mobile | AL | Lifting & Handling | 220-ton crawler crane | $1,199,122 | — |
| FY2026 | MARISCO, LTD. | Kapolei | HI | Cutting & Forming | Press brake with tooling, plate roller | $1,183,848 | 4× |
| FY2009 ARRA | National Maintenance and Repair, Inc. | Hartford | IL | Lifting & Handling | 220-ton crane | $1,180,707 | 3× |
| FY2012 | Detyens Shipyards, Inc. | Charleston | SC | Drydock & Haul-Out | Two 20-ton tower cranes set at both ends of an existing drydock | $1,176,776 | 4× |
| FY2026 | Corn Island Shipyard, Inc. | Grandview | IN | Cutting & Forming | Steel processing, plasma cutter, welding equipment | $1,174,867 | — |
| FY2023 | Everett Ship Repair, LLC | Everett | WA | Lifting & Handling | 140-ton telescopic crawler crane | $1,168,613 | 5× |
| FY2010 | Caddell Dry Dock & Repair Co., Inc. | Staten Island | NY | Drydock & Haul-Out | Drydock refurbishment | $1,162,636 | — |
| FY2022 | ST Engineering Halter Marine and Offshore, Inc. | Pascagoula | MS | Coatings & Surface Prep | Electric blast and paint booth project | $1,154,670 | 4× |
| FY2009 Omnibus | Bollinger Shipyards Lockport, LLC | Lockport | LA | Cutting & Forming | Press, plasma table, mill | $1,146,596 | 2× |
| FY2023 | Marine Group Boat Works, LLC | Chula Vista | CA | Lifting & Handling | 820-ton variable width marine travelift | $1,142,447 | 5× |
| FY2009 ARRA | Kvichak Marine Industries, Inc. | Seattle | WA | Lifting & Handling | Crane, aluminum plate processing, training | $1,138,602 | 2× |
| FY2018 | James Marine, Inc. dba Walker Boat Yard | Paducah | KY | Lifting & Handling | 80-ton rough terrain crane | $1,125,000 | 3× |
| FY2021 | Bollinger Marine Fabricators | Amelia | LA | Coatings & Surface Prep | Blast and paint plate preservation line machine | $1,122,216 | — |
| FY2012 | Conrad Shipyard, LLC | Amelia | LA | Drydock & Haul-Out | Drydock modernization expanding a 10,000-ton floating drydock by 2,500 tons and 70 feet | $1,117,019 | 6× |
| FY2022 | Chesapeake Shipbuilding, Corp. | Salisbury | MD | Lifting & Handling | Plasma table, travelift crane, CNC equipment, and press brake | $1,114,539 | 8× |
| FY2019 | Marinette Marine Corporation | Marinette | WI | Lifting & Handling | Three 100-ton bridge cranes | $1,100,000 | 3× |
| FY2013 | Seacraft Shipyard, LLC | Amelia | LA | Lifting & Handling | Marine travelift | $1,100,000 | — |
| FY2009 ARRA | SAFE Boats International, LLC | Port Orchard | WA | Lifting & Handling | Cranes, travelift, and other equipment | $1,097,495 | 5× |
| FY2009 ARRA | Seward Ship's Drydock, Inc. | Seward | AK | Facility & Utilities | Ship transport cradles, syncrolift controls, compressed air upgrades | $1,088,078 | — |
| FY2012 | Gulf Marine Repair Corporation | Tampa | FL | Drydock & Haul-Out | Modernize and upgrade a 14,000-ton drydock | $1,083,055 | 6× |
| FY2018 | Bayonne Drydock and Repair Corp. | Bayonne | NJ | Drydock & Haul-Out | CNC plasma table, brake press, plate roll, welding machines, graving dock upgrades | $1,081,950 | 3× |
| FY2026 | HFL 412 Marine, Inc. | Georgetown | PA | Lifting & Handling | 165-ton lattice boom crawler crane | $1,081,613 | — |
| FY2010 | Marisco, Ltd. | Kapolei | HI | Lifting & Handling | Cranes, forklifts, welding machines, compressors, dust collector | $1,079,224 | 4× |
| FY2012 | Great Lakes Shipyard | Cleveland | OH | Lifting & Handling | Lighting, automatic cutting burn table, scissor lift, welding equipment, scaffolding, high-pressure lifting skid, boom lift, and transporter | $1,068,474 | 6× |
| FY2020 | Mare Island Dry Dock, LLC | Vallejo | CA | Lifting & Handling | 165-ton rough terrain crane | $1,066,326 | — |
| FY2018 | Glendale Boat Works, Inc. | Channelview | TX | Lifting & Handling | 400-ton marine travelift | $1,064,654 | — |
| FY2026 | LAD Services Of Louisiana LLC | Morgan City | LA | Lifting & Handling | 165-ton crawler crane | $1,041,329 | — |
| FY2011 | Alaska Ship and Drydock, Inc. | Ketchikan | AK | Lifting & Handling | Welder, material handling system, CNC cutting system | $1,018,315 | 3× |
| FY2011 | BAE Systems Southeast Shipyards Alabama | Mobile | AL | General Equipment & Modernization | Steel profile processing system | $1,008,838 | — |
| FY2019 | Heartland Fabrication, LLC | Brownsville | PA | Lifting & Handling | Automated coating application system and conveyor | $1,008,000 | 4× |
| FY2026 | Gulf Marine Repair Corp. | Tampa | FL | Lifting & Handling | Slip utilities upgrade, loaders, telehandler, training equipment | $1,007,678 | 6× |
| FY2026 | Dean Marine and Excavating, Inc. | Dearborn | MI | Drydock & Haul-Out | Floating drydock operational restoration | $1,000,000 | — |
| FY2026 | Robert E. Derecktor, Inc. | Mamaroneck | NY | Lifting & Handling | 200-ton marine crane | $1,000,000 | 3× |
| FY2023 | Driscoll, Inc. dba Driscoll Boat Works, LLC | San Diego | CA | Lifting & Handling | 150-ton marine travelift | $1,000,000 | — |
| FY2023 | ACBL Transportation Services, Inc. | Jeffersonville | IN | Drydock & Haul-Out | 200 x 70 ft floating drydock | $1,000,000 | — |
| FY2023 | Verret Shipyard, Inc. | Plaquemine | LA | Drydock & Haul-Out | 120 x 64 ft floating drydock | $1,000,000 | — |
| FY2023 | Hughes Bros. | Brooklyn | NY | Drydock & Haul-Out | 160 x 86 ft floating drydock | $1,000,000 | 3× |
| FY2023 | Sterling Shipyard | Port Neches | TX | Drydock & Haul-Out | 120 x 80 ft floating drydock | $1,000,000 | — |
| FY2020 | Cabras Marine Corporation | Piti | GU | Lifting & Handling | 275-ton truck crane | $1,000,000 | — |
| FY2018 | Jarrett Bay Boatworks, Inc. | Beaufort | NC | Lifting & Handling | 300-ton marine travelift | $1,000,000 | — |
| FY2011 | Hendry Corporation | Tampa | FL | Drydock & Haul-Out | New dry dock | $1,000,000 | — |
| FY2013 | C&C Marine and Repair | Belle Chasse | LA | Lifting & Handling | 220-ton hydraulic crane | $999,920 | 4× |
| FY2026 | Lake Champlain Transportation Company | Burlington | VT | Drydock & Haul-Out | 10-ton crane, marine railway catwalk, mooring slip | $999,784 | — |
| FY2019 | Rhoads Industries, Inc. | Philadelphia | PA | Lifting & Handling | Mobile crane for repair efficiency | $999,250 | 2× |
| FY2013 | All American Marine | Bellingham | WA | Lifting & Handling | Overhead cranes, welding machines, CNC router, scissors lifts, painting and ventilation upgrades | $999,100 | 5× |
| FY2024 | Gulf Marine Repair | Tampa | FL | Drydock & Haul-Out | Dry dock reinforcement for 311' x 99' x 41'8" drydock | $997,678 | 6× |
| FY2024 | Birdon America, Inc | Bayou La Batre | AL | Welding & Joining | Automated welding system | $997,065 | — |
| FY2026 | C&B Energy Services LLC | Hebron | KY | Drydock & Haul-Out | 60 x 70 ft floating drydock | $991,565 | — |
| FY2017 | Portland Shipyard | Portland | ME | Lifting & Handling | 330-ton Marine Travelift | $990,500 | — |
| FY2022 | Turn Services, LLC. | New Orleans | LA | Lifting & Handling | 60-ton pedestal crane installation | $988,742 | — |
| FY2009 ARRA | Atlantic Marine Philadelphia LLC | Philadelphia | PA | Drydock & Haul-Out | 60-ton crane and drydock ship handling system | $988,687 | — |
| FY2012 | Kvichak Marine Industries | Seattle | WA | Lifting & Handling | Water-jet cutting table, hydraulic swing beam shear, lighting, jib crane, welding equipment, and boatbuilding skills training | $987,307 | 2× |
| FY2021 | Heartland Fabrication, LLC | Brownsville | PA | Welding & Joining | Robotic welding system supporting new technician positions | $982,954 | 4× |
| FY2013 | International Ship Repair & Marine Services | Tampa | FL | Lifting & Handling | 275-ton crawler crane | $980,260 | 2× |
| FY2020 | C&C Marine and Repair, LLC | Belle Chasse | LA | Lifting & Handling | 275-ton crawler crane | $979,638 | 4× |
| FY2026 | Thunderbolt Marine Inc. | Savannah | GA | Lifting & Handling | 150-ton Travelift | $979,636 | — |
| FY2026 | Gulf Copper LLC | Galveston | TX | Cutting & Forming | 120' x 14'-06" CNC plasma cutting system | $976,384 | — |
| FY2019 | JAG Alaska, Inc. Seward Shipyard | Seward | AK | General Equipment & Modernization | Water wash-down/recovery and vessel transport system upgrades | $976,298 | 2× |
| FY2023 | Highmark Marine Fabricators, LLC | Kodiak | AK | Lifting & Handling | 120-ton rough terrain crane | $969,191 | — |
| FY2011 | Yank Marine, Inc. | Tuckahoe | NJ | Lifting & Handling | 300-ton Marine Travelift | $961,676 | 2× |
| FY2021 | Lyon Shipyard | Norfolk | VA | Lifting & Handling | 15-ton bridge crane, electrical substations, and upgrades | $958,695 | 3× |
| FY2022 | Duclos Corporation dba Gladding Hearn | Somerset | MA | Drydock & Haul-Out | Shop doors, boat transporter, and overhead crane | $949,899 | 3× |
| FY2013 | Dorchester Shipyard, Inc. | Dorchester | NJ | Drydock & Haul-Out | New floating dry dock | $945,800 | 3× |
| FY2023 | Norseman Shipbuilding and Boatyard, LLC | Miami | FL | Lifting & Handling | 150-ton marine travelift | $939,274 | 2× |
| FY2026 | Rozema's Boat Works, Inc. | Mount Vernon | WA | Cutting & Forming | CNC router, press brake, mechanical shear | $938,176 | — |
| FY2022 | Blount Boats, Inc. | Warren | RI | Lifting & Handling | Material handling equipment including cranes and lifts | $937,933 | 4× |
| FY2010 | Earl Industries, L.L.C. | Portsmouth | VA | Lifting & Handling | Laser cutter and two 5-ton bridge cranes | $923,496 | — |
| FY2010 | Detyens Shipyards, Inc. | North Charleston | SC | Lifting & Handling | Tower crane, hydroblast units, overhead shop cranes | $922,393 | 4× |
| FY2023 | All American Marine, Inc. | Bellingham | WA | Cutting & Forming | CNC dual head router and press brake systems | $916,166 | 5× |
| FY2026 | Arcosa Marine Products | Caruthersville | MO | Cutting & Forming | 600-ton press modernization with die system | $911,171 | 2× |
| FY2009 ARRA | Navatek LTD | Honolulu | HI | Cutting & Forming | Movable fabrication bay and CNC router | $902,634 | — |
| FY2022 | Fairlead Boatworks, Inc. | Newport News | VA | Lifting & Handling | New 160-ton rough terrain crane | $900,000 | — |
| FY2017 | A & Z Marine, Inc. | Port Allen | LA | Lifting & Handling | 440-ton Marine Travelift | $900,000 | — |
| FY2017 | Bludworth Marine, LLC | Houston | TX | Drydock & Haul-Out | Build a 3,000-ton floating drydock | $900,000 | 4× |
| FY2026 | North Shore Marine Terminal & Logistics Inc. | Escanaba | MI | Drydock & Haul-Out | Drydock control modernization with valve upgrades | $898,022 | 2× |
| FY2021 | Marine Hydraulics International, LLC | Norfolk | VA | Lifting & Handling | 100-ton hydraulic crane and waterjet cutting table | $897,853 | 3× |
| FY2011 | Jamesbuilt, LLC | Calvert City | KY | Welding & Joining | One-side panel welding system | $882,150 | 2× |
| FY2022 | International Ship Repair & Marine Service, Inc. | Tampa | FL | Lifting & Handling | Plasma cutting table, forklift, welding equipment, and overhead crane | $880,758 | — |
| FY2011 | Brownsville Marine Products, LLC | Brownsville | PA | Coatings & Surface Prep | Automated blast and coat system | $877,940 | 2× |
| FY2009 ARRA | P&R Water Taxi, LLC | Honolulu | HI | Lifting & Handling | 110-ton crane | $876,745 | — |
| FY2022 | Bay Marine Boatworks, Inc. | Richmond | CA | Drydock & Haul-Out | 100-ton marine travelift and 60-ton vessel transporter | $875,968 | — |
| FY2024 | WCT Marine & Construction, Inc | Astoria | OR | Drydock & Haul-Out | 450-ton vessel transporter | $874,297 | 2× |
| FY2023 | Fincantieri Marine Repair, LLC | Jacksonville | FL | Coatings & Surface Prep | Water blast and wastewater treatment system | $874,079 | — |
| FY2008 | Pacific Shipyards International, LLC | Honolulu | HI | Lifting & Handling | Water blast system and a mobile crane | $869,977 | 4× |
| FY2022 | Arcosa Marine Products, Inc. | Caruthersville | MO | Cutting & Forming | Panel line improvements and welding equipment | $869,951 | 2× |
| FY2009 ARRA | Blount Boats, Inc. | Warren | RI | Cutting & Forming | Hydraulic shear, brake press, plate roller | $868,186 | 4× |
| FY2009 Omnibus | VT Halter Marine, Inc. (Halter Moss Point) | Moss Point | MS | Cutting & Forming | CNC burning table | $868,011 | 4× |
| FY2008 | Derecktor Shipyards Conn., LLC | Bridgeport | CT | Lifting & Handling | Welding tank, welding machines, air casters and hydraulic bender | $863,515 | 3× |
| FY2019 | East Coast Repair & Fabrication, LLC | Norfolk | VA | Lifting & Handling | 110-ton telescopic boom hydraulic truck crane | $860,000 | — |
| FY2013 | Jeffboat, LLC | Jeffersonville | IN | General Equipment & Modernization | Redesign and modernization of vessel production line three | $845,817 | 3× |
| FY2009 ARRA | The Great Lakes Towing Company | Cleveland | OH | General Equipment & Modernization | Tooling and equipment | $845,407 | 6× |
| FY2009 ARRA | ICE FLOE, LLC / Nichols Brothers Boat Builders | Freeland | WA | Welding & Joining | Training, environmental coverings, welding equipment | $841,077 | 5× |
| FY2023 | Superior Marine Ways, Inc. | South Point | OH | Cutting & Forming | CNC brake and plasma table | $838,221 | — |
| FY2020 | Chesapeake Shipbuilding Corp. | Salisbury | MD | Lifting & Handling | 130-ton rough terrain crane | $830,622 | 8× |
| FY2023 | Bay Ship and Yacht Co. | Alameda | CA | Lifting & Handling | 165-ton Grove GRT 9165 crane with 205-foot boom | $830,380 | 6× |
| FY2008 | Colonna's Shipyard | Norfolk | VA | Lifting & Handling | 1,000-ton travelift | $825,000 | 4× |
| FY2025 | Breaux's Bay Craft, Inc. | New Iberia | LA | Lifting & Handling | 150-ton Marine Travelift Model 200-CII and telescopic boom | $817,150 | — |
| FY2025 | Chesapeake Shipbuilding Corp | Salisbury | MD | Lifting & Handling | 160-ton rough terrain mobile crane | $817,150 | 8× |
| FY2025 | Snow and Company, Inc. | Seattle | WA | Cutting & Forming | CNC laser cutting machine, CNC press brake, deburring machine | $817,150 | 2× |
| FY2025 | Fraser Shipyards, LLC | Superior | WI | Lifting & Handling | Link Belt 130-ton telescopic boom rough terrain crane | $817,146 | 2× |
| FY2024 | Philly Shipyard, Inc | Philadelphia | PA | Workforce & Training | Shipyard apprentice program | $800,000 | 6× |
| FY2019 | St. John's Ship Building Inc. | Palatka | FL | Cutting & Forming | Metal working equipment and yard improvements | $800,000 | 2× |
| FY2020 | Colonna's Shipyard, Inc. | Norfolk | VA | Welding & Joining | Welding machines | $799,996 | 4× |
| FY2022 | Dorchester Shipyard, Inc. | Dorchester | NJ | Drydock & Haul-Out | Marine railway upgrades for vessel hauling and launching | $796,143 | 3× |
| FY2020 | Fraser Shipyards, Inc. | Superior | WI | Lifting & Handling | Overhead material handling and steel brake processing improvements | $793,162 | 2× |
| FY2016 | Yager Marine | Owensboro | KY | Drydock & Haul-Out | 1,200-ton drydock | $786,673 | — |
| FY2022 | The Great Lakes Towing Company | Cleveland | OH | General Equipment & Modernization | Tooling and equipment enhancing shipyard operations | $781,627 | 6× |
| FY2019 | Detyens Shipyards, Inc. | Charleston | SC | Lifting & Handling | Electrical upgrades, crane, and forklifts | $781,315 | 4× |
| FY2013 | Lyon Shipyard | Norfolk | VA | Cutting & Forming | CNC lathe | $779,168 | 3× |
| FY2022 | McGinnis, Inc. | South Point | OH | Lifting & Handling | 110-ton crane to shorten project completion timeframes | $770,250 | 2× |
| FY2018 | Ironhead Marine Inc. | Toledo | OH | Lifting & Handling | 150-ton off-road crane | $768,500 | — |
| FY2026 | Dirty Bottom LLC | Christiansted | VI | Lifting & Handling | 75-ton variable-width marine Travelift | $763,401 | — |
| FY2021 | Bay Ship & Yacht, Co. | Alameda | CA | Lifting & Handling | Mobile crane, welding equipment, and electric boom lifts | $759,419 | 6× |
| FY2017 | Gulf Island Shipyards | Houma | LA | Cutting & Forming | Laser CNC cutting machine and CNC pipe bending machine | $757,168 | 2× |
| FY2020 | Mackinac Island Ferry Company dba Mackinac Marine Service | MI | Lifting & Handling | Travelift and welding equipment | $752,933 | — | |
| FY2026 | Arrow Launch Service, Inc. | Port Angeles | WA | Lifting & Handling | 75-ton Travelift | $750,000 | — |
| FY2021 | C&C Marine and Repair, LLC | Belle Chasse | LA | Lifting & Handling | Welding enhancements and additional forklifts | $748,959 | 4× |
| FY2020 | Marisco, Ltd. | HI | Coatings & Surface Prep | Blast and paint booth | $745,872 | 4× | |
| FY2016 | American Shipyard Company LLC | Newport | RI | Lifting & Handling | 200-ton travelift | $744,990 | — |
| FY2009 ARRA | Marine Fluid Systems, Inc. | Eastonville | WA | Drydock & Haul-Out | Railway trolley, crane, forklift, iron worker, welding machines | $744,244 | — |
| FY2023 | The Portland Company | Portland | ME | Drydock & Haul-Out | 60-ton vessel trailer, tractor/loader, ventilation | $739,302 | — |
| FY2021 | Bay City Marine | National City | CA | Lifting & Handling | Mobile crane | $738,990 | — |
| FY2026 | Marine Technical Services, Inc. | Wilmington | CA | Lifting & Handling | Crane, truck, welding machines, portable equipment | $738,829 | — |
| FY2019 | Thoma-Sea Marine Constructors, LLC | Lockport | LA | Lifting & Handling | Three overhead cranes | $738,645 | — |
| FY2023 | Senesco Marine, LLC | North Kingstown | RI | Welding & Joining | Sub arc welding system, servers, lift, compressor | $738,289 | 3× |
| FY2026 | Blakeley Boatworks Inc. | Mobile | AL | Cutting & Forming | Welding machines, CNC equipment, compressor systems | $736,544 | 3× |
| FY2021 | Everett Ship Repair LLC | Everett | WA | Drydock & Haul-Out | Drydock containment system, water blasting equipment, and air compressors | $731,385 | 5× |
| FY2018 | Pacific Shipyards International | Honolulu | HI | Cutting & Forming | Spray paint sandblast booth, hydraulic press, valve tester, four jibs | $731,159 | 4× |
| FY2023 | Bayonne Drydock & Repair Corp. | Bayonne | NJ | Coatings & Surface Prep | Ultra high pressure hydro blasting equipment | $730,477 | 3× |
| FY2025 | PAR61 Marine Repair | Port Allen | LA | Lifting & Handling | Travelift infrastructure improvements including concrete foundation work and power distribution | $723,242 | — |
| FY2022 | Blakely Boatworks Inc. | Mobile | AL | Cutting & Forming | Metal working equipment consisting of welding machines | $722,460 | 3× |
| FY2021 | Philly Shipyard, Inc. | Philadelphia | PA | Workforce & Training | Three-year apprentice training program | $720,000 | 6× |
| FY2023 | Alabama Shipyard LLC | Mobile | AL | Facility & Utilities | Air compressor systems and fire suppression pumps | $718,442 | 2× |
| FY2012 | Trinity Industries, Inc. | Caruthersville | MO | Welding & Joining | One-side welding system for stiffened panel fabrication | $718,395 | 2× |
| FY2022 | SAFE Boats International, LLC | Bremerton | WA | Drydock & Haul-Out | Vessel transporter, welding equipment, and lifting devices | $716,983 | 5× |
| FY2018 | Glasstech Corp. | Miami | FL | Drydock & Haul-Out | 165-ton marine travelift, 65-ton vessel transporter | $715,688 | — |
| FY2018 | North Shore Marine Terminal & Logistics, Inc. | Escanaba | MI | General Equipment & Modernization | Material cutting/handling equipment modernization and safety improvements | $713,468 | 2× |
| FY2019 | Mike's Inc. | South Roxana | IL | Lifting & Handling | 110-ton lattice boom crawler crane | $709,405 | 2× |
| FY2009 ARRA | Foss Maritime Company (Rainier Yard) | Rainier | OR | Lifting & Handling | Hydraulic dollies and 90-ton crane | $707,550 | 2× |
| FY2023 | J. Goodison Company | North Kingstown | RI | Drydock & Haul-Out | 176-ton hydraulic self-propelled vessel transporter | $704,206 | 5× |
| FY2019 | Paducah Barge, LLC | Paducah | KY | Drydock & Haul-Out | New dry dock construction | $700,570 | — |
| FY2026 | James Marine Inc. | Wickliffe | KY | Lifting & Handling | 65-ton crane, telehandler | $699,433 | 3× |
| FY2021 | Blue Atlantic Fabricators Inc. | Boston | MA | Lifting & Handling | Blast machine, conveyor, electrical upgrades, paint booth, and gantry cranes | $692,826 | — |
| FY2019 | Yank Marine Services, LLC | Dorchester | NJ | General Equipment & Modernization | Temporary shelters for atmospheric control | $692,558 | — |
| FY2020 | Gulf Marine Repair Corporation | Tampa | FL | Lifting & Handling | CNC plasma cutting machine and 100-ton rough terrain crane | $692,100 | 6× |
| FY2013 | Conrad Orange Shipyard | Orange | TX | Facility & Utilities | Shipyard electrical upgrades | $686,539 | 6× |
| FY2021 | Lake Union Drydock Co. | Seattle | WA | Drydock & Haul-Out | New drydock basin passageway, air equipment, and forklift | $684,127 | 3× |
| FY2013 | Blount Boats | Warren | RI | Lifting & Handling | Metal working equipment, engineering software, work shelter and material handling equipment | $680,272 | 4× |
| FY2026 | Bayonne Drydock & Repair Corp. | Bayonne | NJ | Coatings & Surface Prep | Hydro-blasting and surface preparation system | $673,123 | 3× |
| FY2012 | LEEVAC Shipyards, LLC | Jennings | LA | General Equipment & Modernization | Pipe and tube bending system | $667,324 | 3× |
| FY2018 | Front Street Shipyard | Belfast | ME | Cutting & Forming | Water jet cutting machine | $667,028 | — |
| FY2011 | Southwest Shipyard, LP | Channelview | TX | Cutting & Forming | Stiffener welding system | $664,325 | 3× |
| FY2026 | RECONCRAFT, LLC | Clackamas | OR | Lifting & Handling | Overhead cranes, MIG and TIG welding stations | $661,982 | — |
| FY2023 | Heartland Fabrication, LLC | Brownsville | PA | Lifting & Handling | 25-ton electric bridge cranes and rigging | $660,783 | 4× |
| FY2026 | Shellfish Marine Inc. | West Sayville | NY | Lifting & Handling | 100-ton marine Travelift | $659,750 | — |
| FY2023 | Mike's Inc. | South Roxana | IL | Lifting & Handling | 30-ton crane, telehandler, welding equipment | $653,422 | 2× |
| FY2022 | Shaver Transportation Company | Portland | OR | Lifting & Handling | Electrification project including crane and solar system | $649,638 | 2× |
| FY2008 | Conrad Shipyard, LLC | Morgan City | LA | Welding & Joining | Welding equipment and a range of tools | $648,648 | 6× |
| FY2024 | SHM Newport Shipyard LLC | Newport | RI | Drydock & Haul-Out | 180-MT vessel transporter | $647,567 | — |
| FY2024 | Lighthouse Marine, LLC | Port Bolivar | TX | Lifting & Handling | Lift, crane, welding, cutting and painting equipment | $646,157 | — |
| FY2010 | Diversified Marine Tech, Inc. | Tampa | FL | Lifting & Handling | 90-ton crane and modification of barge for crane use | $644,425 | — |
| FY2010 | Pacific Fishermen Shipyard and Electric, LLC | Seattle | WA | Lifting & Handling | Training program, sandblast and paint booths, grit recovery systems, man lifts, 15-ton crane | $643,095 | 2× |
| FY2018 | Sause Bros. Inc. dba Southern Oregon Marine, Inc. | Coos Bay | OR | Lifting & Handling | Mobile rough terrain crane, air compressors, paint management system | $642,329 | — |
| FY2019 | Eastern Shipbuilding Group, Inc. | Panama City | FL | General Equipment & Modernization | Equipment for increased productivity | $640,618 | 5× |
| FY2009 Omnibus | Total Marine Services of Jefferson, Inc. | Harvey | LA | Lifting & Handling | Crawler crane, welding equipment | $640,264 | — |
| FY2020 | Philly Shipyard, Inc. | Philadelphia | PA | Cutting & Forming | Messer CNC plate cutting system | $640,158 | 6× |
| FY2021 | JAG Alaska, Inc. Seward Shipyard | Seward | AK | Lifting & Handling | 100-ton Grove hydraulic crane | $639,712 | 2× |
| FY2022 | Blackfish Solutions, LLC dba ReconCraft | Estacada | OR | Lifting & Handling | 25-ton cranes, rigging, and welding equipment | $638,667 | — |
| FY2017 | J. Goodison Company, Inc. | North Kingstown | RI | Coatings & Surface Prep | Wash water collection and treatment system | $635,453 | 5× |
| FY2008 | Washburn & Doughty Associates | East Boothbay | ME | Cutting & Forming | Pipe benders, inverter welding machines, hydraulic press brake and other equipment | $633,422 | 3× |
| FY2009 Omnibus | Duclos Corporation / Gladding-Hearn Shipbuilding | Somerset | MA | Lifting & Handling | Lifts, cranes, lighting | $629,675 | 3× |
| FY2008 | Duclos Corporation (Gladding-Hearn) | Somerset | MA | Drydock & Haul-Out | Railway assembly: upgrading and extending railway capacity, and dock extension | $628,300 | 3× |
| FY2009 ARRA | Foss Maritime Company (Seattle Yard) | Seattle | WA | Lifting & Handling | Lifts, forklifts, brake press, bridge crane welding machines, hydraulic dollies | $621,761 | 2× |
| FY2009 ARRA | James Wickliffe (Division of James Marine, Inc.) | Wickliffe | KY | Lifting & Handling | 40-ft lathe, 25-ton crane, boom lift | $620,025 | — |
| FY2018 | Washburn & Doughty Associates, Inc. | West Boothbay | ME | Cutting & Forming | Robotic welding machines, CNC lathe | $618,750 | 3× |
| FY2025 | St. Johns Ship Building, Inc. | Palatka | FL | Lifting & Handling | Grove GRT8100 110-ton rough terrain crane and hydraulic jack system | $617,040 | 2× |
| FY2008 | Alaska Ship and Drydock | Ketchikan | AK | Coatings & Surface Prep | Metal equipment, machine shop and painting equipment upgrades | $615,805 | 3× |
| FY2009 ARRA | Davis Boat Works, Inc. | Newport News | VA | Coatings & Surface Prep | Blast enclosure and electrical upgrades | $612,097 | — |
| FY2012 | Bludworth Marine, LLC | Houston | TX | Lifting & Handling | Rubber tire gantry crane to lift and transport barges, modules and materials | $610,266 | 4× |
| FY2016 | Conrad Orange Shipyard | Orange | TX | Welding & Joining | LNG tank and pipe welding equipment | $604,505 | 6× |
| FY2011 | Marinette Marine Corporation | Marinette | WI | Facility & Utilities | Dust collection system, air compressors | $604,394 | 3× |
| FY2019 | Northern Enterprises Boat Yard, Inc. | Homer | AK | Lifting & Handling | 150-metric ton Travelift | $604,053 | — |
| FY2023 | Sunflower Enterprises, Inc. | Dubuque | IA | Lifting & Handling | 100-ton marine travelift | $599,840 | — |
| FY2025 | JamesBuilt, LLC | Calvert City | KY | Lifting & Handling | 65-ton rough terrain crane | $599,130 | 2× |
| FY2021 | Boston Ship Repair | South Boston | MA | Facility & Utilities | Power distribution equipment upgrades | $598,200 | 2× |
| FY2026 | Catalyst Marine Engineering, LLC | Seward | AK | Lifting & Handling | Press brake, telehandler, robotic welding cell | $595,545 | 3× |
| FY2021 | MBLH Marine LLC | Port Arthur | TX | Lifting & Handling | 110-ton crawler crane | $588,812 | 3× |
| FY2025 | Heartland Fabrication, LLC | Brownsville | PA | Cutting & Forming | Koike Aronson PlatePro XHD Model 3700 plasma cutting machine | $588,092 | 4× |
| FY2020 | SAFE Boats International, L.L.C. | Bremerton | WA | Cutting & Forming | CNC router and press brake | $587,035 | 5× |
| FY2024 | MARISCO, Ltd | Honolulu | HI | Cutting & Forming | Electric air compressor and plasma cutter | $584,563 | 4× |
| FY2016 | Gravois Aluminum Boats, LLC | Jeanerette | LA | General Equipment & Modernization | Portable shelter and transporter | $582,410 | 2× |
| FY2008 | Safe Boats | Port Orchard | WA | Cutting & Forming | Router tables, information technology system upgrades and other machinery | $579,084 | 5× |
| FY2012 | Foss Maritime Company | Seattle | WA | Lifting & Handling | Two 45-foot manlifts, 14,000 CFM dust collection system, forklift, and work shelters | $578,402 | 2× |
| FY2009 ARRA | Union Dry Dock & Repair Company | Hoboken | NJ | Welding & Joining | Welding equipment, lifting equipment, blast and coating equipment | $577,902 | — |
| FY2017 | Boston Ship Repair, LLC | Boston | MA | Facility & Utilities | Electrical upgrades | $576,000 | 2× |
| FY2021 | Tecnico Corporation | Chesapeake | VA | Lifting & Handling | Telescopic boom crane and productivity equipment | $573,940 | — |
| FY2020 | WCT Marine & Construction Inc. | Astoria | OR | General Equipment & Modernization | Big top enclosed work structure, work pad with drains, and filtration system | $573,075 | 2× |
| FY2020 | Alabama Shipyard, LLC | Mobile | AL | Lifting & Handling | Upgrade four travel trucks with new assemblies on a 150-ton portal crane | $571,887 | 2× |
| FY2017 | The Great Lakes Towing Company | Cleveland | OH | General Equipment & Modernization | Equipment, tooling and software to improve shipyard efficiency and competitiveness | $570,065 | 6× |
| FY2026 | Shipbuilders of Wisconsin, Inc. | Manitowoc | WI | Facility & Utilities | Digital engineering infrastructure and workstations | $568,720 | — |
| FY2022 | Detyens Shipyards, Inc. | North Charleston | SC | Facility & Utilities | Electric fire pumps replacing diesel alternatives | $566,617 | 4× |
| FY2020 | Mavrik Marine Inc. | La Conner | WA | Lifting & Handling | Bridge crane, welding system, and compressor | $564,850 | — |
| FY2019 | Moran Iron Works, Inc. | Onaway | MI | Cutting & Forming | PythonX CNC fabricating system | $564,300 | 2× |
| FY2024 | Motive Power Marine | Tacoma | WA | Lifting & Handling | Electrical upgrades, air compressor, and telehandler | $559,687 | — |
| FY2013 | Chesapeake Shipbuilding Corp. | Salisbury | MD | Lifting & Handling | Industrial gas system, compressed air system and mobile crane | $559,686 | 8× |
| FY2012 | Liquid Waste Technology, LLC | New Richmond | WI | Lifting & Handling | Two forklifts, 50-ton rubber tire gantry crane, and training simulator room equipment | $558,843 | — |
| FY2021 | Pacific Fishermen Shipyard and Electric, LLC | Seattle | WA | Coatings & Surface Prep | Rail enhancements, lift dock conversions, and paint improvements | $556,308 | 2× |
| FY2019 | Moose Boats | Vallejo | CA | Lifting & Handling | Travelift transporter and CNC router table | $555,429 | — |
| FY2021 | Metalcraft Marine US, Inc. | Watertown | NY | Cutting & Forming | CNC cutting table, rotating jig positions, and blasting booth | $554,237 | — |
| FY2024 | Rhoads Industries, Inc | Philadelphia | PA | Welding & Joining | Expanded welding training with mechanized systems | $552,846 | 2× |
| FY2008 | Great Lakes Shipyard | Cleveland | OH | Lifting & Handling | 80-ton mobile crane, man lift and automated welding equipment | $546,000 | 6× |
| FY2016 | Chesapeake Shipbuilding | Salisbury | MD | Lifting & Handling | Mobile crane and infrastructure | $545,505 | 8× |
| FY2009 ARRA | Paducah River Service | Calvert City | KY | Cutting & Forming | Plasma cutting machine and CNC lathe | $542,526 | — |
| FY2019 | VT Halter Marine | Pascagoula | MS | General Equipment & Modernization | Equipment for construction and repair efficiency | $536,000 | 4× |
| FY2017 | Vigor Alaska, LLC | Ketchikan | AK | Cutting & Forming | Robotic pressure washer, milling machine, shear, VFD air compressor, air pallet load module, lathe, scaffolding and stair towers, electric capstans, pneumatic fenders | $533,014 | 3× |
| FY2008 | Brownsville Marine Products, LLC | Brownsville | PA | Lifting & Handling | Hydraulic buggies, winches, mobile crane, jib and overhead cranes | $532,226 | 2× |
| FY2016 | Eastern Shipbuilding Group | Panama City | FL | Cutting & Forming | Precision cutting system | $529,868 | 5× |
| FY2023 | Main Industries, Inc | North Charleston | SC | Coatings & Surface Prep | Two HydraBlast pumps and equipment | $527,173 | — |
| FY2011 | MBLH Marine / Vessel Repair | Port Arthur | TX | Lifting & Handling | 20-ton tower crane | $525,000 | — |
| FY2021 | Marine Group Boat Works LLC | Chula Vista | CA | Welding & Joining | Air compressors and in-house welder training program | $524,058 | 5× |
| FY2021 | Eastern Shipbuilding Group, Inc. | Panama City | FL | General Equipment & Modernization | Equipment to improve construction and repair efficiency | $522,318 | 5× |
| FY2018 | Bollinger Shipyards, Lockport LLC | Lockport | LA | Cutting & Forming | Lathe mill multi-task machine, PythonX robotic CNC plasma system | $521,753 | 2× |
| FY2018 | Metal Trades, Inc. | Hollywood | SC | General Equipment & Modernization | Kinetic heavy duty cutting and drilling machine | $520,167 | 2× |
| FY2011 | Nichols Brothers Boat Builders | Freeland | WA | Lifting & Handling | 25-ton and 40-ton mobile cranes | $519,761 | 5× |
| FY2010 | Chesapeake Shipbuilding Corp. | Salisbury | MD | General Equipment & Modernization | Doors, heaters, air and gas distribution systems | $519,098 | 8× |
| FY2019 | J. Goodison Company, Inc. | North Kingstown | RI | General Equipment & Modernization | Elevated workstation and mobile equipment upgrades | $518,538 | 5× |
| FY2024 | C&C Marine and Repair, LLC | Belle Chasse | LA | Cutting & Forming | Messer CNC plasma cutting table | $514,263 | 4× |
| FY2019 | Shark Tech, LLC | Bayou la Batre | AL | Lifting & Handling | Welding enhancements and material handling equipment | $511,671 | — |
| FY2017 | Bay Maritime Corporation | Alameda | CA | Cutting & Forming | CNC bed mill and CNC bridge mill | $509,718 | 6× |
| FY2017 | Blount Boats, Inc. | Warren | RI | Cutting & Forming | Metal working equipment, painting enhancements, and a 25-ton marine transporter | $508,927 | 4× |
| FY2018 | Marine Hydraulics International, Inc. | Norfolk | VA | Lifting & Handling | Ten forklifts | $505,617 | 3× |
| FY2020 | J. Goodison Company, Inc. | North Kingstown | RI | Lifting & Handling | Rough terrain crane | $504,237 | 5× |
| FY2018 | Fraser Shipyard, Inc. | Superior | WI | Lifting & Handling | Two self-propelled modular transporters, high capacity forklift | $500,738 | — |
| FY2022 | Moran Iron Works, Inc. | Onaway | MI | Cutting & Forming | CNC fabricating system reducing production time | $500,561 | 2× |
| FY2021 | Master Boat Builders, Inc. | Coden | AL | Lifting & Handling | Two 30-ton mobile cranes and two extendable boom forklifts | $497,464 | 4× |
| FY2009 ARRA | Guam Industrial Services, Inc. | Santa Rita | GU | Cutting & Forming | Plasma cutting machine and plate roll machine | $495,561 | — |
| FY2020 | Metal Trades, Inc. | SC | Lifting & Handling | 55-ton Grove all terrain crane and three Skytrak telehandler forklifts | $492,128 | 2× | |
| FY2018 | Chesapeake Shipbuilding Corp. | Salisbury | MD | Lifting & Handling | Four extending boom forklifts, mobile crane, mobile launching ways | $492,047 | 8× |
| FY2018 | SCF Services, Inc. | St. Louis | MO | Lifting & Handling | 110-ton crawler crane, employee skills training | $489,917 | — |
| FY2008 | Gulf Marine Repair Corp. | Tampa | FL | Lifting & Handling | Four cranes, two electric plate rollers and other manufacturing equipment | $487,630 | 6× |
| FY2017 | Jeffboat, LLC | Jeffersonville | IN | Lifting & Handling | 80-ton Grove mobile crane | $479,150 | 3× |
| FY2009 ARRA | Associated Naval Architects, Inc. | Portsmouth | VA | General Equipment & Modernization | Surface prep equipment and air service upgrades | $476,893 | — |
| FY2010 | United States Marine, Inc. | Gulfport | MS | Cutting & Forming | Epoxy oven, composite freezer, CNC material cutter | $476,670 | 4× |
| FY2017 | Detyens Shipyard, Inc. | North Charleston | SC | Coatings & Surface Prep | Climate controlled down draft paint booth and steel fabrication equipment | $466,985 | — |
| FY2024 | James Marine, Inc. dba Paducah River Service | Paducah | KY | Lifting & Handling | 40-ton rough terrain crane | $460,500 | 3× |
| FY2013 | North Florida Shipyard | Jacksonville | FL | Coatings & Surface Prep | Waste water treatment and recycling system | $459,160 | 2× |
| FY2026 | Everett Ship Repair LLC | Everett | WA | Facility & Utilities | Electrical upgrades, shipyard process training | $456,216 | 5× |
| FY2009 Omnibus | Zidell Corporation | Portland | OR | Cutting & Forming | Plasma cutter, welding equipment, lifter | $454,042 | — |
| FY2009 ARRA | Paducah River Painting | Calvert City | KY | Lifting & Handling | Two rough terrain cranes | $453,000 | — |
| FY2018 | Gravois Aluminum Boats, LLC | Jeanerette | LA | Lifting & Handling | 80-ton rough terrain crane, welding equipment | $451,860 | 2× |
| FY2008 | Master Marine | Bayou La Batre | AL | Lifting & Handling | Travelift | $450,000 | — |
| FY2018 | Patti Marine Enterprise, Inc. | Pensacola | FL | Cutting & Forming | Plasma cutting machine and iron worker | $449,231 | — |
| FY2025 | Resolve Marine Group Inc | Dutch Harbor | AK | Lifting & Handling | Caterpillar 980 wheel loader | $447,341 | — |
| FY2009 ARRA | Everett Shipyard, Inc. | Everett | WA | Workforce & Training | Mobile cover and training program | $439,497 | 5× |
| FY2021 | Thames Shipyard & Repair Company Inc. | New London | CT | Coatings & Surface Prep | Surface preparation equipment and air compressors | $438,690 | 6× |
| FY2022 | May Ship Repair Contracting Corporation | Staten Island | NY | Cutting & Forming | CNC cutting table, jig positions, and blasting booth | $436,800 | — |
| FY2009 Omnibus | VT Halter Marine, Inc. | Moss Point | MS | Cutting & Forming | Press brake, CNC table | $436,406 | 4× |
| FY2008 | Eastern Shipbuilding Group | Panama City | FL | Cutting & Forming | Metal cutting equipment and a computer system | $436,274 | 5× |
| FY2021 | Conrad Shipyard | Amelia | LA | Coatings & Surface Prep | Two portable shelters for fabrication and paint areas | $432,376 | 6× |
| FY2025 | Master Boat Builders | Bayou la Batre | AL | Lifting & Handling | Training equipment including welding machines, gantry crane, pipe bender, and work stations | $427,596 | 4× |
| FY2012 | Chesapeake Shipbuilding Corporation | Salisbury | MD | Facility & Utilities | Air compressors, personnel lifts, mobile grit recovery system, and workforce cross-training program | $423,752 | 8× |
| FY2020 | Gulf Copper Ship Repair, Inc. | Corpus Christi | TX | Lifting & Handling | 110-ton crane | $423,186 | — |
| FY2013 | Thames Shipyard and Repair Co. | New London | CT | Coatings & Surface Prep | Flow ultra-high-pressure (UHP) surface preparation system | $422,264 | 6× |
| FY2021 | Steiner Shipbuilding, Inc. | Bayou La Batre | AL | Lifting & Handling | Forklift, 300-ton press brake, manlift, and efficiency equipment | $419,507 | 2× |
| FY2022 | Catalyst Marine Engineering | Seward | AK | General Equipment & Modernization | Mobile repair platforms enabling expanded revenue and employee growth | $418,903 | 3× |
| FY2025 | Conrad Orange Shipyard, Inc. | Orange | TX | Cutting & Forming | CNC plasma cutting system | $418,201 | 6× |
| FY2009 ARRA | SeaArk Marine, Inc. | Monticello | AR | Lifting & Handling | Crane and forklift | $416,213 | — |
| FY2016 | Marine Group Boat Works | Chula Vista | CA | Lifting & Handling | Gantry crane and equipment | $414,954 | 5× |
| FY2009 ARRA | Atlantic Marine Boston, LLC | Boston | MA | Drydock & Haul-Out | Drydock ship handling system | $412,688 | — |
| FY2009 ARRA | BAE Systems San Diego Ship Repair | San Diego | CA | Workforce & Training | First year of training program | $410,874 | — |
| FY2011 | Bay Ship & Yacht Co. | Alameda | CA | Facility & Utilities | Air compressor, electrical upgrades | $405,789 | 6× |
| FY2019 | LaShip | Houma | LA | General Equipment & Modernization | Advanced metal manufacturing equipment | $402,900 | — |
| FY2018 | Catalyst Marine Engineering, Inc. | Seward | AK | Cutting & Forming | Mach 500 water jet cutting system | $400,097 | 3× |
| FY2008 | R&R Marine Shipbuilding | Port Arthur | TX | Lifting & Handling | Stiffener fitting gantry, facility electrical upgrades, panel line fabrication facility | $400,000 | — |
| FY2019 | All American Marine | Bellingham | WA | Coatings & Surface Prep | Painting area improvements to accommodate larger vessels | $397,725 | 5× |
| FY2018 | Marine Group Boat Works, LLC | Chula Vista | CA | Lifting & Handling | CNC plasma table, 125-foot boom lift, 33,000-lb forklift | $392,037 | 5× |
| FY2019 | Port Bolivar Marine Service, Inc. | Port Bolivar | TX | General Equipment & Modernization | Equipment for construction and repair efficiency | $390,451 | — |
| FY2012 | Gladding-Hearn Shipbuilding | Somerset | MA | Facility & Utilities | Shipyard infrastructure upgrades | $389,195 | — |
| FY2017 | General Ship Repair Corporation | Baltimore | MD | Drydock & Haul-Out | Drydock wash water removal and processing system | $388,903 | 3× |
| FY2025 | Bay Ship & Yacht Co. | Alameda | CA | Cutting & Forming | CNC plasma arc/gas cutting equipment | $388,777 | 6× |
| FY2026 | Signet Maritime Corporation | Pascagoula | MS | Cutting & Forming | CNC plasma table, welding tractors, equipment | $387,745 | — |
| FY2017 | Colonna's Shipyard, Inc. | Norfolk | VA | Lifting & Handling | Link-Belt 110-ton rough terrain crane | $387,500 | 4× |
| FY2016 | Yank Marine | Dorchester | NJ | Lifting & Handling | 70-ton crane | $386,250 | 2× |
| FY2020 | Blakely BoatWorks, Inc. | Mobile | AL | Lifting & Handling | 500-ton press brake, welding machines, overhead cranes, and man lifts | $379,408 | 3× |
| FY2024 | Inventec Marine Solutions, LLC | Bremerton | WA | Coatings & Surface Prep | Electric clean paint booth with blast and spray booths | $378,079 | — |
| FY2017 | National Maintenance & Repair | KY | Cutting & Forming | Vantage Oil Country lathe | $377,433 | 3× | |
| FY2009 ARRA | Scarano Boat Building, Inc. | Albany | NY | Lifting & Handling | CNC router, crane, epoxy dispensing system | $375,613 | — |
| FY2024 | Cooper Consolidated LLC | Convent | LA | Lifting & Handling | Equipment package including welding machines and telehandler | $368,440 | 2× |
| FY2009 ARRA | Blue Danube Incorporated | Dunlevy | PA | General Equipment & Modernization | Production enhancements | $365,115 | — |
| FY2024 | The General Ship Repair Corporation | Baltimore | MD | Coatings & Surface Prep | Blast/paint facility with ultra high pressure water blasting unit | $364,311 | 3× |
| FY2019 | Hughes Bros., Inc. | Edison | NJ | Coatings & Surface Prep | Abrasive blasting equipment | $363,957 | 3× |
| FY2010 | Boothbay Harbor Shipyard, LLC | Boothbay Harbor | ME | General Equipment & Modernization | Assistance to Small Shipyards capital award (project detail not itemized in the federal record) | $360,900 | — |
| FY2026 | Taylor Marine Construction of Texas, LLC | Kemah | TX | Lifting & Handling | Industrial winch, boom lift, telehandler | $360,343 | — |
| FY2008 | Todd Shipyards Corporation | Seattle | WA | Facility & Utilities | Enlarge and renovate main assembly building | $358,515 | — |
| FY2025 | Ice Floe, LLC dba Nichols Brothers Boat Builders | Freeland | WA | Cutting & Forming | CNC router and laser tables, dust collector, and welding equipment | $357,317 | 5× |
| FY2019 | Rockland Marine Corporation | Rockland | ME | Drydock & Haul-Out | Equipment to accelerate marine railway construction | $351,956 | — |
| FY2017 | Philly Shipyard, Inc. | Philadelphia | PA | Welding & Joining | Modernization and upgrades to a welding system | $346,544 | 6× |
| FY2021 | BRIX Marine | Port Angeles | WA | Cutting & Forming | CNC router table and support equipment | $342,318 | 2× |
| FY2009 ARRA | Offshore Inland Marine & Oilfield Services, Inc. | Mobile | AL | Lifting & Handling | Forklift and other equipment | $330,618 | — |
| FY2026 | Thames Shipyard & Repair Company | New London | CT | Coatings & Surface Prep | Blast machine, dust collector, compressor, sprayer | $323,005 | 6× |
| FY2026 | Safe Boats International LLC | Bremerton | WA | Welding & Joining | Aluminum welding training program with 17 welding machines | $321,474 | 5× |
| FY2009 Omnibus | Pacific Ship Repair & Fabrication, Inc. | San Diego | CA | Cutting & Forming | Waterjet cutter, press brake, shear | $319,365 | — |
| FY2009 ARRA | Stevens Towing Co., Inc. | Yonges Island | SC | General Equipment & Modernization | Floating dock and equipment | $318,533 | 3× |
| FY2020 | Smith Boys Marine Sales Inc. | North Tonawanda | NY | Cutting & Forming | Transporter and CNC plasma cutter | $317,641 | — |
| FY2018 | United States Marine, Inc. | Gulfport | MS | Cutting & Forming | Lamination apprentice program, CNC core cutting machine, paint booth | $313,270 | 4× |
| FY2021 | Gulf Island Shipyards, LLC | Houma | LA | Welding & Joining | Automated pipe spool welding equipment | $312,802 | 2× |
| FY2023 | The Thames Shipyard & Repair Company, Inc. | New London | CT | Coatings & Surface Prep | Water-jet surface preparation equipment | $309,853 | 6× |
| FY2009 ARRA | Trinity Industries, Inc. | Caruthersville | MO | Cutting & Forming | Plasma cutter | $308,538 | 2× |
| FY2016 | Diversified Marine | Portland | OR | Welding & Joining | Lifts and welding equipment | $304,846 | 2× |
| FY2026 | Steiner Construction Company, Inc. | Bayou La Batre | AL | Cutting & Forming | Press brake, band saw, beam handling system | $300,988 | 2× |
| FY2025 | Lake Union Drydock Company | Seattle | WA | Lifting & Handling | Broderson 9-ton mobile crane, welding machines, plate cutter, LED lighting | $298,132 | 3× |
| FY2009 ARRA | All American Marine, Inc. | Bellingham | WA | Welding & Joining | Painting equipment, welding equipment, shipyard machinery, IT upgrades | $297,827 | 5× |
| FY2008 | Everett Shipyard, Inc. | Everett | WA | Lifting & Handling | Work stations and an overhead crane | $297,036 | 5× |
| FY2022 | Robert E. Derecktor, Inc. | Mamaroneck | NY | Cutting & Forming | New CNC flatbed lathe for complex metal shaping | $294,483 | 3× |
| FY2008 | All American Marine, Inc. | Bellingham | WA | Cutting & Forming | Metal cutting machinery and boat transfer equipment | $285,000 | 5× |
| FY2017 | Dakota Creek Industries | Anacortes | WA | Cutting & Forming | Steel frame bending and straightening machine and CNC router table | $280,878 | — |
| FY2011 | Senesco Marine, LLC | North Kingstown | RI | General Equipment & Modernization | Launch equipment and software | $279,677 | 3× |
| FY2008 | Horizon Shipbuilding, Inc. | Bayou La Batre | AL | Cutting & Forming | Computerized plasma cutting table | $277,500 | 2× |
| FY2025 | J. Goodison Company, Inc. | North Kingstown | RI | Cutting & Forming | Welding equipment, plate beveling tool and press brake | $274,596 | 5× |
| FY2021 | Hughes Bros. Inc. | Edison | NJ | Lifting & Handling | Welding machines, forklift, pipe rollers, and related equipment | $264,510 | 3× |
| FY2019 | Port of Toledo | Toledo | OR | Welding & Joining | Welding career training program | $261,285 | — |
| FY2009 ARRA | Marine Hydraulics International, Inc. | Norfolk | VA | Cutting & Forming | Paint cure booth and CNC plasma cutter | $259,650 | 3× |
| FY2010 | Reuben Johnson & Son, Inc. | Superior | WI | Cutting & Forming | Cutting machine and welding equipment | $257,990 | — |
| FY2019 | Norseman Shipbuilding and Boatyard, LLC | Miami | FL | General Equipment & Modernization | Three major equipment pieces for efficiency improvements | $255,131 | 2× |
| FY2012 | Navatek Ship Construction | Honolulu | HI | Facility & Utilities | Wind turbines and towers providing renewable electrical service to the yard | $248,805 | — |
| FY2025 | Marine Group Boat Works, LLC | Chula Vista | CA | Cutting & Forming | Flow Mach 500 waterjet metal cutting table | $248,403 | 5× |
| FY2023 | United States Marine, Inc. | Gulfport | MS | Cutting & Forming | Two Eastman CNC tables | $238,741 | 4× |
| FY2018 | Dorchester Shipyard, Inc. | Dorchester | NJ | Facility & Utilities | Two electric air compressor systems, electrical upgrades | $232,585 | 3× |
| FY2021 | Stabbert Marine & Industrial, LLC | Seattle | WA | Lifting & Handling | Heavy-duty forklift, boom lift, and welding equipment | $228,745 | — |
| FY2021 | St. Johns Boat Company | Jacksonville | FL | Coatings & Surface Prep | Hybrid blast and paint building manlift | $221,175 | — |
| FY2018 | National Maintenance and Repair, Inc. | Hartford | IL | Cutting & Forming | Plasma cutting system | $217,538 | 3× |
| FY2023 | Mystic Seaport Museum, Inc. | Mystic | CT | Lifting & Handling | Wood-mizer sawmill and hybrid articulating boom lifts | $214,452 | 2× |
| FY2026 | Fred Wahl Marine Construction, Inc. | Reedsport | OR | Coatings & Surface Prep | Wash water treatment system, pressure washers | $195,336 | — |
| FY2010 | J.B. Marine Service, Inc. | Saint Louis | MO | Lifting & Handling | Bridge crane, ironworker, steel shear, forklift | $195,000 | — |
| FY2017 | Thames Shipyard & Repair Co. | New London | CT | Coatings & Surface Prep | Confined space surface preparation equipment | $191,762 | 6× |
| FY2012 | Bollinger Shipyards | Lockport | LA | Cutting & Forming | Robotic plasma pipe-cutting machine, big top protective tent structure, induction heating distortion control system | $188,887 | — |
| FY2009 ARRA | Lake Union Drydock Company | Seattle | WA | Cutting & Forming | IT upgrade and steel plate roller | $184,217 | 3× |
| FY2010 | Sause Bros. Ocean Towing Co., Inc. | Coos Bay | OR | Coatings & Surface Prep | Water blast system, sandblasting machine, big top shelter | $173,749 | — |
| FY2012 | Allen Marine, Inc. | Sitka | AK | Welding & Joining | Welding fume and particulate extraction system for aluminum welding operations | $163,500 | — |
| FY2009 Omnibus | William E. Munson Co., Inc. | Edmonds | WA | Cutting & Forming | Welders, shear, press | $150,585 | — |
| FY2021 | Omega Shipyard, Inc. | Moss Point | MS | Lifting & Handling | Telescoping forklift and blasting pot | $126,105 | — |
| FY2009 ARRA | Bludworth Marine LLC | Orange | TX | Lifting & Handling | 30-ton crane and forklift | $124,875 | 4× |
| FY2026 | United States Marine Inc. | Gulfport | MS | Lifting & Handling | Three forklifts | $123,072 | 4× |
| FY2009 ARRA | Horizon Shipbuilding, Inc. | Bayou La Batre | AL | General Equipment & Modernization | Gas and air storage and distribution system | $99,000 | 2× |
| FY2025 | Eastern Shipbuilding Group, Inc. (Allanton) | Panama City | FL | Cutting & Forming | 10-foot plate shear | $93,538 | 5× |
| FY2023 | NC Dept. of Transportation, Ferry Division | Havelock | NC | Workforce & Training | Employee training and certification program | $86,649 | — |
| FY2009 ARRA | Platypus Marine, Inc. | Port Angeles | WA | General Equipment & Modernization | IT upgrades | $73,780 | — |
| FY2018 | Snow and Company, Inc. | Seattle | WA | Welding & Joining | Iron worker, weld positioner, engraving machine, four welding machines | $67,511 | 2× |
| FY2008 | Leevac Shipyards, LLC | Jennings | LA | General Equipment & Modernization | Software to expand engineering capability | $66,068 | 3× |
| FY2026 | Champions Auto Ferry Inc. | Algonac | MI | Cutting & Forming | Engine block cleaning tank, lathe | $53,500 | — |
| FY2026 | Chesapeake Bay Maritime Museum, Inc. | St. Michaels | MD | Workforce & Training | Workforce development for supervisory capabilities | $41,250 | — |
| FY2026 | Mystic Seaport Museum, Inc. | Mystic | CT | General Equipment & Modernization | Steam generator | $13,239 | 2× |
| FY2026 | Shaver Transportation Co. | Portland | OR | Workforce & Training | Marine engine repair skills training | $10,400 | 2× |
| FY2024 | Gulfship Apprenticeship, LLC | Gulfport | MS | Cutting & Forming | CNC machine for training and shipyard support | $4,547 | — |
| FY2026 | Woods Hole, Martha's Vineyard and Nantucket Steamship Authority | Falmouth | MA | Lifting & Handling | Hoisting license training initiative | $4,185 | — |